"4c"Care and Cleaning
« Back

• Before disconnecting plug from electrical outlet, always turn off the kettle or lift kettle from base station.

• Remove cord from electrcal outlet and make sure kettle has cooled before handling.

• Clean the base by wiping with clean, damp, cloth. Do not use abrasive cleaners or scouring pads. Wipe dry.

• Rinse interior of kettle using clean water and gently wipe dry using lint-free cloth.

• Do not leave standing water in the kettle. Always discard unused water and dry interior surfaces when not in use.

• To remove filter, open lid and lift tab on filter to inside. Filter will hinge, grasp with
fingers and gently remove.

• It is normal to see the stainless steel cover of the heater plate at the bottom of the kettle change color after use or if your water has high iron content brownish stains may appear and can be removed with cloth and mild stain remover.

• Boiling water can leave behind harmless, white calcium deposits inside the kettle and mainly on the stainless steel heater cover. Use a commercially available de-calcifying agent or add 1 oz. vinegar to water, fill to minimum level and run BOIL cycle.

Hint: If the kettle switches off before water is reaches set point, it may need to be decalcified. Frequency depends on hardness of water and number of uses.
Newsletter Sign-up